Listed here in the next paragraph yow will discover a bunch of good quality expertise about What Would Cause My Electric Water Heater to Stop Working?.
Several modern-day houses utilize an electrical hot water heater for their heater, because of its convenience and also convenience of use. Nevertheless, just like any other electric devices, issues may emerge with its use, suddenly. It can be really irritating to get up to a cold shower as opposed to a hot one or having your bath with water that isn't warm sufficient and even too hot. Whatever the instance might be, water heater problems can be quite aggravating. Luckily, we've made a list of feasible options to your water heater issues. There are a variety of aspects that might cause most of these issues, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it fixed should not posture excessive of an issue if you adhere to these steps:
Call A Professional:
If after changing all faulty components and resetting your temperature, the hot water heater still isn't working, you might need to speak to an expert plumber for a specialist opinion. The issue with your heater could be that the cold and hot faucets have been switched over or it may be undersized for the quantity of warm water needed in your house. Whatever the case may be, a specialist plumber would assist solve the issue.
Inspect Your Power Supply:
As standard as this may seem, it is really necessary. Without appropriate power, your hot water heater will not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, merely turn it off and on once more. Change any damaged or damaged fuse. Test the appliance with power after these modifications to see if it's currently working.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature settings on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the access panel as well as press the red switch for temperature reset above the thermostat. This need to help heat up the water. Transform the breaker back on and inspect if the issue has actually been settled.
Examine the Burner in the Water Heater:
If it's not a power problem, then try having a look at your heating element if it is still working. Check each of your burner to ensure the trouble isn't with any of them. If any one of them is damaged, replace that part and after that inspect whether the warm water is back on.
Verdict
Hot water heater problems are not constantly significant. Most of them result from small concerns like a blown fuse or damaged burner. Changing the damaged components need to suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your nearby plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed reading our part on How to Troubleshoot and Repair an Electric Water Heater. Many thanks for taking time to read our short article. Sharing is caring. Helping others is fun. Thank you for your time. Kindly come by our website back soon.
Schedule A Service Call